However a temperature difference exists within a system or when two systems at different temperatures are brought into contact, energy is transferred. The process by which the energy transport takes place is known as heat transfer. Heat cannot be measured or observed directly, but the effect it produces is amenable to observation and measurement.
Product Details:
Multi Heat Exchanger with Data Acquisition System Consists of | a. Concentric tube Heat Exchanger, b.Shell & Tube Heat Exchanger, c.Plate Heat Exchanger, Jacketed |
Plate Heat Exchanger | Stainless steel/ Copper multiple plates |
Jacketed Vessel: | Copper coil & with SS outer jacket. |
Temperature Sensors: | 4 nos for each Heat Exchangers. (Inlet & Outlet of both the fluids) with indicator. |
RS converter: | Suitable RS485 to RS232 signal converter with USB communication cable for interfacing. |
Temperature control unit: | with suitable sensor & relay. |
Software: | Suitable Lab View based software with provision for data monitoring, Performance calculation, data t |
Concentric tube: | 2 sections of copper inner tubes with SS outer casing |
Shell and tube: | Copper inner tubes with SS outer shell. |
- Service module consisting of | Hot water tank and pump. |
Heater: | 2 or 3 kW. |
Flow meters: | Turbine Type Flow Sensor with indicator for both Hot water and cold water. |
The System offers basic experimental apparatus is used for studying of four types of heat exchangers.
Product Details:
Stop Watch | Digital, 1/10 of a second, Racer/Pacer Make |
Manual | Self explanatory Instruction manual with sample calculation |
Specimen: | 16 mm dia, Plain Copper tube for film wise condensation 16 mm dia, Gold plated Plain Copper tube for |
Water Tank | SS with Powder coated, Approximately 25-30 liters with FHP pump |
Temperature Indicator | Digital Temperature Indicator, 0-400 DegreeC with Thermocouple selector switch |
Thermocouples | Teflon coated Cr -Al (K-type)-8 no. |
Flow measurement | Measuring Jar with digital stop watch (Rota meters 0-100 cc/sec at extra cost). |
Measuring Jar | Plastic-250ml |
Experimental Capability | Heat transfer Co-Efficient |
Control Panel | Stand Alone Metallic powder Table Type panel |
Glass Column | 100mm OD, 300mm long, 5 mm thick -2 nos |
Steam Generator | An SS boiler with 3kw Heater |
To determine the overall Heat Transfer Coefficient of both Drop and Film wise Condensation.
Product Details:
Minimum Order Quantity | 10 Piece |
Usage/Application | Engineering Laboratory Equipments |
Material | Mild Steel |
Maximum Wheel Diameter | 45mm |
Current | 15 A AC |
Voltage | 220V |
Automation Type | Semi-Automatic |
Product Details:
Experimental Capability | Thermal Conductivity |
Manual | Self explanatory Instruction manual with sample calculation |
Enclosure | MS Box of 10"x10" in size with glass wool insulation |
Temperature Indicator | Digital Temperature Indicator ,0-400 DegreeC with TSS |
Thermocouples | Teflon coated Cr -Al (K-type)-8 no. |
Voltmeter | Digital voltmeter of range 0-300V AC |
Ammeter | Digital ammeter of range 0-20A AC |
Regulator | Electronic Dimmer 1kW. (2Amps Variac At extra cost) |
Optional Feature @ Extra | Computerized data acquisition system with software |
Control Panel | Stand Alone Metallic powder coated panel |
Specimen | Slab: 200mm dia, MS(20mm), Hylam(15mm) & Wood(10mm) with tightening clamp attatchment |
Heater | 150 mm dia. Mica -250watts |
To find out total thermal resistance and total thermal conductivity of composite slab
Product Details:
Flow Type | Cross Flow |
Dual AC Watt Meter : | Range : 0 -999W, 230v AC, 50 Hz Display 1: Heater Power in Watts |
Mixing Pump: | Submercible pump, FHP |
Control Panel Components | Various control switches are provided to control different electrical and electronic components. Eac |
Pressure Indicator: | Range : 0 - 5 kg/cm2 Display 1: Inlet Water Pressure in kg/cm2 (bar) - P1 Display 2: Outlet Water Pr |
Multi Channel Indicator 1: | Range: -50 to +150 degree C Display 1: Channel No. ( 1-8) Display 2: Temperature in degree C ( chann |
Multi Channel Indicator 2: | Range: -50 to +150 degree C Display 1: Channel No. ( 9-16) Display 2: Temperature in degree C ( chan |
Temperature Points: | T1 to T9: Specimen temperatures at Entry side T10 to T18: Specimen temperatures at Exit side T19 : W |
Supply Pump: | Diaphragm Pump, 24VDC, 0.33 Amps, Flow rate:1.6 lpm |
Multi Channel Indicator31: | Range: -50 to +150 degree C Display 1: Channel No. ( 17-24) Display 2: Temperature in degree C ( cha |
Heater: | Type: Mica, capacity:1kW |
Heater Control / Regulator: | Variable Potentio meter: Capacity |
Water Flow Indicator: | Range: 0 - 99.9 cc/sec Display 1: Flow rate of Water in cc/sec Sensor: Turbine type |
Country of Origin | Made in India |
Various Components Used in the MICRO CHANNEL HEAT EXCHANGER TEST SETUP
Product Details:
Minimum Order Quantity | 10 Piece |
Usage/Application | Engineering Laboratory Equipments |
Material | Mild Steel |
Maximum Wheel Diameter | 45mm |
Heat Exchanger Type | Fluidized |
Rated Pressure | 105bar |
Protection Class | IP66 |
Transfer Area | 20.4 cm |
Maximum Power | 150W |
Product Details:
Heater | Band Heater-500W |
Cooling Fan | 8" dia exhaust fan |
Voltmeter | Digital voltmeter of range 0-300V AC |
Ammeter | Digital ammeter of range 0-20A AC |
Thermocouples | Teflon coated Cr -Al (K-type)-8 no. |
Stopwatch | Digital Stop Watch. |
Control Panel | Stand Alone Metallic powder coated panel |
Duct / Enclosure | MS powder coated duct of 8"x8" in size 8" dia MS shell with glass wool insulation |
Regulator | Electronic Dimmer 1kW. (2Amps Variac At extra cost) |
Optional Feature @ Extra | Computerized data acquisition system with software |
Experimental Capability | Nusslet No. And Biot No. |
Specimen | Copper 30mm dia, 30mm long, |
Temperature Indicator | Digital Temperature Indicator ,0-400 DegreeC with TSS |
Manual | Self explanatory Instruction manual with sample calculation |
Country of Origin | Made in India |
Obtain the specimen temperature at any interval of time by practical and by theoretical methods and observe the heating and cooling curves of unsteady state
Product Details:
Thermocouples | Teflon coated Cr -Al (K-type)-5 no. |
Manual | Self explanatory Instruction manual with sample calculation |
Optional Feature @ Extra | Computerized data acquisition system with software |
Control Panel | Stand Alone Metallic powder coated panel |
Hot water tank | Sterilizer(5 liters) with 1 kW immersion heater |
Temperature Indicator | Digital Temperature Indicator ,0-199.9 DegreeC with TSS |
Stop Watch | Digital, 1/10 of a second, Racer/Pacer Make |
Experimental Capability | Stefan Boltzman Constant |
Specimen | 20mm dia x 0.5mm thickness copper |
Hot water jacket | Copper hemisphere of 200 dia with SS vessel and hylam base |
Country of Origin | Made in India |
To determine the value of Stefan Boltzman constant for radiation heat transfer.
Product Details:
Material | Stainless Steel |
Glass Column | 75mm OD, 300mm long |
Ammeter | Digital ammeter of range 0-2A AC |
Flow sensor | Flow sensor with digital indicator |
Experimental Capability | Rate of Heat Transfer, Effectiveness |
Pressure sensor | Pressure sensor with digital indicator |
Control Panel | Stand Alone Metallic powder coated panel |
Thermocouples | RTD PT 100 type 5 nos |
Voltmeter | Digital voltmeter of range 0-200V AC |
Regulator | Dimmer stat 4A |
Specimen | Methylene Dichloride (CH2CL2) |
Temperature transmitter/ controller | Digital Temperature Indicator ,0-400 DegreeC with TSS |
Manual | Self explanatory Instruction manual with sample calculation |
Country of Origin | Made in India |
The test set up consists of cylindrical transparent tube 300 mm length 114 mm dia 3mm thick where water is heated with heater coil; you can see the change of phase. Water evaporates. In second phase the vapours touches the copper coil which is fitted at the top of the tube in which water is passed to cool the coil provision is made to measure the water temp, vapour temperature etc.
Product Details:
Material | Stainless Steel |
Cylindrical Shell | 150mm dia x 300mm Long M.S.Pipe |
Ammeter | Digital ammeter of range 0-20A AC |
Water Jacket | 100mm dia x 100 mm Long M.S.Pipe |
Heater | Band type, Nichrome 250 Watts |
Specimen | 20mm dia, 450mm long Brass / Copper |
Temperature Indicator | Digital Temperature Indicator,0-400 DegreeC with Thermocouple selector switch . |
Control Panel | Stand Alone Metallic powder coated Table Type panel |
Regulator | Electronic Dimmers for individual Heater control. |
Voltmeter | Digital voltmeter of range 0-300V AC |
Thermocouples | Teflon coated Cr -Al (K-type)-11 no. |
Measuring Jar | Plastic-250ml |
Country of Origin | Made in India |
The apparatus consists of a Copper rod, one end of which is heated by an electric heating coil while the other end projects into the cooling water jacket. The rod is insulated with glass wool to minimize the radiation and convection loss from the surface of the rod and thus ensure nearly constant temperature gradient throughout the length of the rod. The temperature of the rod is measured at five different locations. The heater is provided with a dimmerstat for controlling the heat input. Water is circulated through the jacket and its flow rate and temperature rise can be measured.
Product Details:
Minimum Order Quantity | 1 Piece |
Voltmeter | Digital voltmeter of range 0-300V AC |
Regulator | Electronic Dimmer 1kW-2 nos. (2Amps Variac At extra cost) |
Experimental Capability | Emmissivity |
Specimen | 150 mm dia, 6 mm thickness, Brass / Aluminum - 2 nos |
Enclosure | MS Box of 10"x10"x 20" in size with transparent window |
Ammeter | Digital ammeter of range 0-20A AC |
Thermocouples | Teflon coated Cr -Al (K-type)-7 no. |
Heater | 75 mm dia. Mica -250watts -2 nos |
Temperature Indicator | Digital Temperature Indicator ,0-400 DegreeC with TSS |
Control Panel | Stand Alone Metallic powder coated panel |
Manual | Self explanatory Instruction manual with sample calculation |
Optional Feature @ Extra | Computerized data acquisition system with software |
Country of Origin | Made in India |
To determine the emissivity of gray surface.
Product Details:
Manual | Self-explanatory Instruction manual with sample calculation Self-explanatory Instruction manual with |
Heater | Round type, mica heater100mm dia, 250 watts |
Ammeter | Digital ammeter of range 0-20A AC |
Temperature Indicator | Digital Temperature Indicator ,0-400 DegreeC with TSS |
Experimental Capability | Thermal Conductivity K |
Regulator | Dimmer Stat 2Amps (Variac) -1 nos |
Optional Feature @ Extra | Computerized data acquisition system with software |
Control Panel | Stand Alone Metallic powder coated panel |
Specimen | Inner Sphere: 100mm dia, Copper & Outer Sphere: 200mm dia, Copper |
Voltmeter | Digital voltmeter of range 0-300V AC |
Thermocouples | Teflon coated Cr -Al (K-type)- 12nos. |
Determination of the Thermal Conductivity of Asbestos powder at various heat input
Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Pressure Measurement |
Material | PVC |
Accuracy | 99.9% |
Brand | Tec quip Lab Sols |
Color | Blue |
Size | 2 feet |
Country of Origin | Made in India |
Product Details:
Ammeter | Digital ammeter of range 0-20A AC |
Regulator | Electronic Dimmer 1kW. |
Experimental Capability | Rate of Heat Transfer, Effectiveness & Efficiency of the Fin |
Thermocouples | Teflon coated Cr -Al (K-type)-6 no. |
Optional Feature @ Extra | Computerized data acquisition system with software |
Heater | 32 mm dia, 75mm width Band heater -250watts |
Manometer | 6" U tube Manometer with Mercury |
Voltmeter | Digital voltmeter of range 0-300V AC |
Temperature Indicator | Digital Temperature Indicator ,0-400 DegreeC with TSS |
Specimen | 12mm dia, 250mm long - Brass / Copper |
Blower | 650W, Vollume of 3m3/min,Eltrex or Equvalent reputed make |
Control Panel | Stand Alone Metallic powder coated panel |
Manual | Self explanatory Instruction manual with sample calculation |
Country of Origin | Made in India |
To determine the value of heat transfer co-efficient under forced condition and to find
a) Theoretical values of temperatures along the length of fin
b) Effectiveness and efficiency of the Fins
Product Details:
Comparison specimen | 32mm dia, 3mm thick, 300 mm long Copper and SS |
Heat Sink: | SS tank with Powder coat (0.5 liters) |
Temperature Indicator | Digital Temperature Indicator ,0-400 DegreeC with TSS |
Thermocouples | Teflon coated Cr -Al (K-type)-12 no. |
Heater | 32mm dia, 75 mm width Band Heaters- 250W -3 nos |
Voltmeter | Digital voltmeter of range 0-300V AC |
Manual | Self explanatory Instruction manual with sample calculation |
Control Panel | Stand Alone Metallic powder coated panel |
Test Specimen | 32mm dia, 3mm thick, 300 mm long Copper ( Heat pipe) |
Regulator | With Electronic Dimmers for individual Heater control. With Variac (Dimmerstat) 230V, S.ph, 0- 2Amp. |
Experimental Capability | Demonstration |
Ammeter | Digital ammeter of range 0-20A AC |
Thermometers | -10 to 110 degree C -Alcohol Thermometers - 3 nos |
The heat pipe demonstrator has been designed and developed to reveal clearly the super conducting device. It consists of a three identical cylindrical conductors. One end of these is heated electrically while there are small capacity tanks acting as heat sinks at the other end. The unit consists of a heat pipe, a copper pipe and a stainless steel pipe. Thermocouples are embedded along the lengths to measure the temperature distribution and the heat transfer rate is noted n terms of the temperature rise in the heat sink tanks.